Hanger type shot blasting machine

Hook-type shot blasting machines for parts that are too big, heavy or delicate to tumble.

A hanger type shot blasting machine cleans parts that hang from a hook inside a closed blast chamber. The hook turns slowly while one or more blast wheels throw steel shot at the parts, so large, heavy, complex or delicate parts are cleaned on every side without knocking against each other.

Kleenwell designs each hanger machine in 3D and builds it at our works in Jalandhar, Punjab, with the number of blast wheels and hanger layout chosen for your parts.

  • Large castings and forgings
  • Engine and gearbox housings
  • Fabricated assemblies
  • Brackets and frames
Video
A Kleenwell hanger type shot blasting machine running one full cycle

How a hanger type shot blasting machine works

  1. 1
    Hang the parts: Parts are hung on a hook or a multi-tier hanger outside the machine.
  2. 2
    Move in and close: The hanger travels into the blast chamber on an overhead rail and the doors close.
  3. 3
    Turn and blast: The hanger turns while the blast wheels throw steel shot at the parts from several angles.
  4. 4
    Recover and separate: Shot is carried back up by a screw conveyor and elevator; the separator removes dust and broken shot.
  5. 5
    Collect dust: A dust collector draws dust out through filters.
  6. 6
    Unload: The doors open, the hanger comes out and the clean parts are taken off.

Specifications

FeatureKleenwell hanger type
HangerSingle hook or multi-tier hanger, designed for your parts
Blast wheelsNumber and position chosen for part size, for example four wheels on one side
DoorsSingle or double door
Wear partsNi-Hard and manganese liners; blades, control cages and impellers in stock
Dust collectionPulse-jet dust collector
Load per hook, chamber size and powerBuilt to order: ask us for the figures for your parts

Every machine is built to order. Send your part size, weight and daily quantity and we will confirm the size, blast wheels and power for your job.

Best for

  • Large castings and forgings
  • Engine and gearbox housings
  • Fabricated assemblies
  • Brackets and frames
  • Delicate parts that must not tumble
  • Mixed batches of different shapes
3D design of a Kleenwell hanger type shot blasting machine with four blast wheels
3D design of a Kleenwell hanger type shot blasting machine with four blast wheels
3D design of a hanger machine with a two-tier hanger
3D design of a hanger machine with a two-tier hanger
Clean parts on the hanger after blasting
Clean parts on the hanger after blasting

Compare machine types

Machine typeHow parts moveBest forNot ideal for
Tumblast (rubber belt)Parts tumble on a moving rubber belt under the blast wheelBatches of small castings, forgings, nuts, bolts, hand toolsLarge, long or very delicate parts
Hanger typeParts hang on a hook that turns in front of the blast wheelsLarge, heavy, complex or delicate partsVery small loose parts in bulk
Roller conveyorRollers carry work straight through the blast chamberPlates, beams, pipes, sections, structuresSmall mixed parts
Swing tableParts sit on a turning table inside the cabinetFlat or fragile parts that must not knock togetherHigh-volume small parts
Sand blasting (pressure pot)Operator aims a nozzle; abrasive is pushed by compressed airVery large, fixed or one-off jobs, on-site workRepeat production of the same part

Frequently asked questions

What is a hanger type shot blasting machine?

It is a shot blasting machine in which parts hang from a hook that turns inside a blast chamber while blast wheels throw steel shot at them. It suits large, heavy, complex or delicate parts that cannot be tumbled.

How is a hanger machine different from a Tumblast?

In a Tumblast, small parts roll together on a rubber belt. In a hanger machine, each part hangs separately, so big or delicate parts do not knock against each other and every side is cleaned.

How many blast wheels does a hanger machine need?

It depends on the height and shape of the load. Taller hangers and complex parts need more wheels placed at different heights. We design the layout in 3D for your parts before we build.

What is the price of a hanger type shot blasting machine?

The price depends on the chamber size, number of blast wheels, single or double door and the dust collector. Tell us your part size, weight and daily quantity and we will send a quotation.

Need a shot blasting machine or a spare part?

Call or WhatsApp us with your part size and daily quantity. We will suggest the right machine and send a price.

Contact

Get a shot blasting machine price

Tell us what you need to clean. We will suggest the right machine and send you a quotation.

+91 94643 37847
Call · Mon–Sat, 10:00–18:00
kleenwellfabricator@gmail.com
Email
Works
228/2, Hargobind Nagar, G.T. Road, near Pathankot Chowk Bye Pass, Jalandhar 144001, Punjab

Quick enquiry

We use your details only to reply to this enquiry. See our Privacy Policy.

Or call +91 94643 37847 · Mon–Sat, 10:00–18:00