Roller conveyor shot blasting machine

Continuous, pass-through shot blasting for steel plates, sections, pipes and fabricated structures.

A roller conveyor shot blasting machine is a continuous, pass-through machine. Powered rollers carry steel plates, beams, angles, pipes or fabricated structures through a blast chamber, where blast wheels above and below throw steel shot at every face and remove rust and mill scale before painting.

Because work flows in one end and out the other, it suits steel fabricators and structure makers who need to clean long or heavy pieces without stopping. Kleenwell builds each roller conveyor machine to your work width and height.

  • Steel plates and sheets
  • Beams, angles and channels
  • Pipes and tubes
  • PEB and structural fabrication
Roller conveyor shot blasting machine with in-feed and out-feed roller tables and dust collector
Roller conveyor shot blasting machine with in-feed and out-feed roller tables and dust collector

How a roller conveyor shot blasting machine works

  1. 1
    Feed: Work is placed on the in-feed roller conveyor.
  2. 2
    Blast: Rollers carry it through the chamber while blast wheels clean the top, bottom and sides.
  3. 3
    Clean off shot: Brushes and an air blow-off remove loose shot from the surface.
  4. 4
    Recover and separate: Shot is carried back to the wheels; the separator removes dust and broken shot.
  5. 5
    Collect dust: A dust collector keeps the area clean.
  6. 6
    Out-feed: Clean steel leaves on the out-feed rollers, ready for primer or paint.

Specifications

FeatureKleenwell roller conveyor
WorkPlates, beams, angles, channels, pipes, fabricated structures
Blast wheelsPositioned around the work to reach every face
ConveyorPowered in-feed and out-feed roller tables
Dust collectionPulse-jet dust collector
Work width, height and conveyor speedBuilt to order: tell us your largest section

Every machine is built to order. Send your part size, weight and daily quantity and we will confirm the size, blast wheels and power for your job.

Best for

  • Steel plates and sheets
  • Beams, angles and channels
  • Pipes and tubes
  • PEB and structural fabrication
  • Bright bars
  • Trailer and frame parts
Steel plate before (left) and after shot blasting (right)
Steel plate before (left) and after shot blasting (right)

Compare machine types

Machine typeHow parts moveBest forNot ideal for
Tumblast (rubber belt)Parts tumble on a moving rubber belt under the blast wheelBatches of small castings, forgings, nuts, bolts, hand toolsLarge, long or very delicate parts
Hanger typeParts hang on a hook that turns in front of the blast wheelsLarge, heavy, complex or delicate partsVery small loose parts in bulk
Roller conveyorRollers carry work straight through the blast chamberPlates, beams, pipes, sections, structuresSmall mixed parts
Swing tableParts sit on a turning table inside the cabinetFlat or fragile parts that must not knock togetherHigh-volume small parts
Sand blasting (pressure pot)Operator aims a nozzle; abrasive is pushed by compressed airVery large, fixed or one-off jobs, on-site workRepeat production of the same part

Frequently asked questions

What is a roller conveyor shot blasting machine?

It is a continuous shot blasting machine in which powered rollers carry steel plates, sections, pipes or structures through a blast chamber. Blast wheels around the chamber clean all sides in one pass.

Can a roller conveyor machine clean pipes?

Yes. Pipes and tubes are a common job. For pipes we arrange the blast wheels and rollers so the outside surface is cleaned evenly as the pipe passes through.

Why shot blast steel before painting?

Shot blasting removes mill scale and rust and gives the surface a slight roughness, so primer and paint stick much better and last longer.

What is the price of a roller conveyor shot blasting machine?

It depends on the work width and height, number of blast wheels, conveyor length and dust collector. Send your largest section size and daily tonnage for a quotation.

Need a shot blasting machine or a spare part?

Call or WhatsApp us with your part size and daily quantity. We will suggest the right machine and send a price.

Contact

Get a shot blasting machine price

Tell us what you need to clean. We will suggest the right machine and send you a quotation.

+91 94643 37847
Call · Mon–Sat, 10:00–18:00
kleenwellfabricator@gmail.com
Email
Works
228/2, Hargobind Nagar, G.T. Road, near Pathankot Chowk Bye Pass, Jalandhar 144001, Punjab

Quick enquiry

We use your details only to reply to this enquiry. See our Privacy Policy.

Or call +91 94643 37847 · Mon–Sat, 10:00–18:00