What is shot blasting?

The shot blasting process explained simply, with real photos and video from our customers' works.

Updated 2026-11-15 · Kleenwell Fabricators, Jalandhar

Shot blasting is a surface cleaning process in which small steel balls, called steel shot, are thrown at high speed onto metal parts by a spinning blast wheel. The impact knocks off rust, mill scale, foundry sand and old paint and leaves a clean, slightly rough surface that paint and coatings grip well.

It is done inside a closed shot blasting machine, so the shot can be collected, cleaned and reused many times.

Video
Rusty and blasted universal joint crosses side by side

How the shot blasting process works

  1. 1
    Load: Parts go into the machine: onto a belt, a hook, a table or rollers, depending on the machine type.
  2. 2
    Blast: A blast wheel spinning at high speed throws steel shot onto the parts and knocks off rust, scale, sand and old paint.
  3. 3
    Turn or move: The parts turn or move so that every side faces the blast.
  4. 4
    Recover the shot: Used shot falls to the bottom; a screw conveyor and a bucket elevator carry it back up.
  5. 5
    Separate: A separator removes dust and broken shot so only good shot goes back to the blast wheel.
  6. 6
    Collect dust: A dust collector draws dust out of the machine through filters, keeping the shop clean.
  7. 7
    Unload: Clean, grey metal comes out, ready for painting, powder coating, welding or machining.

What shot blasting is used for

  • Before painting or powder coating: removes rust and scale so the coating sticks and lasts.
  • Foundry castings: removes burnt sand from castings.
  • Forgings and heat-treated parts: removes black scale.
  • Steel fabrication: cleans plates, beams and pipes before primer.
  • Before welding or machining: gives clean metal to work on.

Shot blasting finish

After shot blasting, steel has an even, matte grey finish with a light texture. For painting, buyers often ask for a cleanliness grade such as Sa 2.5 ("near-white metal"). The finish you get depends on the shot size, how long the parts are blasted and the condition of the machine.

Steel shot and grit

Round steel shot gives a smoother, peened finish and is used in most wheel blast machines. Angular steel grit cuts harder and gives a rougher profile for heavy coatings. Shot size is chosen for the parts and the finish needed.

Types of shot blasting machine

Machine typeHow parts moveBest forNot ideal for
Tumblast (rubber belt)Parts tumble on a moving rubber belt under the blast wheelBatches of small castings, forgings, nuts, bolts, hand toolsLarge, long or very delicate parts
Hanger typeParts hang on a hook that turns in front of the blast wheelsLarge, heavy, complex or delicate partsVery small loose parts in bulk
Roller conveyorRollers carry work straight through the blast chamberPlates, beams, pipes, sections, structuresSmall mixed parts
Swing tableParts sit on a turning table inside the cabinetFlat or fragile parts that must not knock togetherHigh-volume small parts
Sand blasting (pressure pot)Operator aims a nozzle; abrasive is pushed by compressed airVery large, fixed or one-off jobs, on-site workRepeat production of the same part

Frequently asked questions

How does shot blasting work?

A blast wheel spinning at high speed throws steel shot onto the parts. The impact removes rust, scale and sand. The shot falls down, is lifted back by an elevator, cleaned in a separator and thrown again, while a dust collector removes the dust.

Why is shot blasting done?

To clean metal before painting, powder coating, welding or machining, so coatings stick and last, and parts look clean and even.

Does shot blasting remove rust?

Yes. Shot blasting removes rust, mill scale and old paint down to clean metal.

Which material is used for shot blasting?

Mainly round steel shot and angular steel grit. They are hard, reusable and suit wheel blast machines.

What is the difference between shot blasting and shot peening?

Shot blasting cleans the surface. Shot peening uses controlled shot impacts to strengthen parts such as springs and gears; the aim is strength, not cleaning.

Is shot blasting dangerous?

Inside a closed machine with a dust collector it is safe to run. Doors must stay closed while blasting, and operators should follow the machine's safety instructions.

Need a shot blasting machine or a spare part?

Call or WhatsApp us with your part size and daily quantity. We will suggest the right machine and send a price.

Contact

Get a shot blasting machine price

Tell us what you need to clean. We will suggest the right machine and send you a quotation.

+91 94643 37847
Call · Mon–Sat, 10:00–18:00
kleenwellfabricator@gmail.com
Email
Works
228/2, Hargobind Nagar, G.T. Road, near Pathankot Chowk Bye Pass, Jalandhar 144001, Punjab

Quick enquiry

We use your details only to reply to this enquiry. See our Privacy Policy.

Or call +91 94643 37847 · Mon–Sat, 10:00–18:00